Get free quotes

Racking systems

Store many pallets of the same product in deep lanes

Free quotes from racking suppliers who build drive-in systems across South Africa. One request, no obligation.

Deep lanes of drive-in racking in a cold store, with pallets resting on rails on both sides
Load notice
LIFOLast in, first out
Deep lanes, one productRef RQ/DRI/779

At a glance: Drive-In RackingRQ/DRI/779

H-01Suits
Cold stores and bulk single product stock
H-02How it works
Forklifts drive in; pallets sit on rails
H-03Range
From a few lanes to a whole cold store
H-04Check first
Pallet quality, truck fit and lane depth
H-05Lead time
Several weeks, longer for large blocks

Drive-in racking stores pallets in deep lanes that the forklift drives into. Instead of beams across the front, pallets rest on rails along each side of the lane, one behind the other and several levels high. Because most aisles disappear, a drive-in block holds far more pallets on the same floor than selective racking. The trade-off is access: you reach the front pallet of each lane first. It suits large quantities of the same product, and it is common in cold stores where every cubic metre costs money to keep cold.

Drive-in and drive-through

Drive-in racking is entered from one side only, so the last pallet in is the first one out (LIFO). That is fine for stock that does not date quickly or where batches are kept separate per lane. Drive-through racking is open at both ends: you load from one side and pick from the other, so it can work first in, first out (FIFO), at the cost of an aisle on each side. Push-back and pallet flow racking are other dense options worth comparing on the warehouse racking page.

Lanes, rails and loads

Each lane is as deep as a set number of pallets, and each lane should hold one product so you are not digging for the pallet you need. Pallets sit on rails, so they must be in good condition and the right size for the rail spacing; broken pallets drop. The maker rates the rails and the structure, and the figures go on the load notice. Floor guide rails at the lane entrance help drivers enter straight. Tell the supplier your pallet size and weight, and how many pallets of each product you hold at a peak.

Drivers and damage

Forklifts drive inside the structure, with steel close on both sides and overhead, so drive-in racking takes more knocks than selective racking. Skilled, careful drivers, good lighting, guide rails and upright protection at the entrances all help. Regular inspections matter here, because a damaged upright deep in a lane is easy to miss. Plan time for repairs to be done safely with the lane emptied. Drivers should enter slowly, lift the pallet clear of the rails before moving, and never push one pallet into the back of another.

Is it right for you?

Drive-in racking pays off when you hold many pallets of few products: frozen and chilled foods, beverages, sugar, fertiliser, packaging material. If you carry hundreds of lines with a few pallets each, selective racking will serve you better. A supplier can compare both on your floor plan. Many sites combine them: a drive-in block for the few lines that fill whole lanes, and selective runs for everything else, with the split based on your stock figures over a busy month.

What to put in your request

  • Pallet size, weight and loaded height
  • Number of products and pallets of each at peak
  • Whether stock must go out first in, first out
  • Forklift type, width and lift height
  • Store temperature if it is a cold or freezer room

Drive-In Racking for warehouses, shops, workshops and homes

  • Warehouses and distribution centres: dense lanes for fast moving bulk lines with few products and many pallets
  • Factories and manufacturers: storing packaging material or one finished product in large volumes
  • Shops, supermarkets and spaza shops: used in the distribution centres behind supermarket chains, not in stores
  • Wholesalers and building supply yards: bulk sugar, flour, beverages or cement held in deep lanes per product
  • Workshops, contractors and trades: rarely suited to a workshop
  • Offices, archives, schools and hospitals: not used for office storage
  • Restaurants, caterers and wine cellars: a food distributor's freezer store packed with pallets of frozen goods
  • Homeowners: not used at home
  • Farms, packhouses and co-ops: fruit cold stores and fertiliser or feed stores with many pallets of one kind

Frequently asked questions

Will you install the drive-in racking?

No. We are a free quote request service: we pass your request to independent racking suppliers and installers in your area, and they quote you directly. We do not make, sell or install racking.

Is drive-in racking good for cold stores?

Often, yes. Cold stores hold many pallets of the same product, and drive-in racking packs them densely so less space has to be kept cold. The steel finish and the forklift must suit the low temperature, and ice on the floor and rails makes careful driving even more important; ask the supplier about cold store experience.

How deep can a drive-in lane be?

It depends on the system, the building and how many pallets of each product you hold. Deeper lanes store more but make it harder to keep one product per lane. The supplier works out a sensible depth from your stock figures.

Can I use any forklift in drive-in racking?

The forklift must fit inside the lane with clearance on both sides and overhead, and lift to the top rail level with a load. Many sites use reach trucks or compact counterbalance forklifts. Give the supplier your truck details, including the width over the wheels and the overall height with the mast lowered.

Drive-In Racking by province and city

More racking, shelving and services

Free quote request, no obligation

Request quotes for drive-in racking

Fill it in the way a storeman books stock in: how many pallets and how heavy, how high the building is and what loads it, or how many bays of shelving and how big, or simply how many inspections, repairs or vans. Suppliers, installers and inspectors in your area quote you directly.

Pick ticket: quote requestDrive-In Racking
Ticket
11992
Bin
B-01-1
Date
2026-11-16
Cost
Free

1The job

2The pallets and the building (optional, it helps the quote)

The rack in elevationnot to scale

-
-
-
-
-
-
Estimate
-

Plain arithmetic for the request, not a racking design.

3Where you are now

4Your list (optional)

  1. 01
  2. 02
Up to 12 lines: bays, frames, beams, shelves, accessories or services.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable racking and shelving suppliers, installers and inspectors. See our privacy policy.

Get free racking quotes