Get free quotes

Free calculator

Mezzanine floor calculator

Enter the floor's length and width, the load it must carry and the column spacing. It gives the area, the total load, the column count and a rough cost range per m².

Mezzanine floor calculatorTL-05

The floor

Floor area
0
Total floor load
0
Columns, about
0
Load on an inner column, about
0
Price at this load, one supplier
0
Rough cost range
0

A mezzanine adds a floor inside the building: a steel deck on columns for storage, picking, offices or a workshop above. Its price and design are driven mainly by the area, the load it must carry and how far apart the columns can stand. This calculator gives all three, with a rough cost range.

How it works it out

  • Load: the floor load times the area. Loads are shown in kg and kN (1 kN/m² is about 102 kg/m²).
  • Columns: one at each grid point, with the spacing rounded so the grid fits the floor evenly. Wider spacing means fewer columns but deeper, heavier beams.
  • Inner column load: the floor load on the area one inner column supports, before the weight of the steel and deck.
  • Cost: published South African prices of about R1,500 to R6,000 per m² installed, and one supplier's list that rises with the floor load: about R1,500 per m² at 400 kg/m², R3,000 at 800, R4,000 at 1,000 and R6,000 at 1,500 kg/m².

What the engineer decides

The design load comes from what the floor is used for: offices, light storage, heavy storage or racking on top. A structural engineer sets it, designs the beams, columns, connections and baseplates, checks the slab under each column, and specifies the stairs, handrails, gates for loading, and any fire protection the building needs. Most mezzanines also need approved building plans from the municipality. Give the floor size, the use and the load in your request, with the clear height under the roof.

Frequently asked questions

What floor load should I ask for?
It depends on the use, and an engineer should confirm it. Offices and light storage need far less than pallet storage or shelving full of spares. If you will store heavier goods later, say so: strengthening a floor afterwards costs much more than designing for it.
How much headroom is needed?
Enough for people and equipment under and over the deck. Many mezzanines aim for at least about 2.4 m clear under the deck, plus the depth of the floor steel. Measure the clear height to the roof steel and give it in the request.
Is a rack-supported mezzanine cheaper?
It can be. The racking or shelving carries the floor, so there are fewer separate columns, and the space under it stores stock. It suits picking floors above shelving. Published South African guides put rack-supported floors at about R2,000 to R5,000 per m².

More calculators and tools

Free quote request, no obligation

Request quotes: a mezzanine floor

Fill it in the way a storeman books stock in: how many pallets and how heavy, how high the building is and what loads it, or how many bays of shelving and how big, or simply how many inspections, repairs or vans. Suppliers, installers and inspectors in your area quote you directly.

Pick ticket: quote requestMezzanine Floors
Ticket
33625
Bin
C-11-1
Date
2026-11-20
Cost
Free

1The job

2The floor area (optional, it helps the quote)

The floor in plannot to scale

-
-
-
-
-
-
Estimate
-

Plain arithmetic for the request, not a racking design.

3Where you are now

4Your list (optional)

  1. 01
  2. 02
Up to 12 lines: bays, frames, beams, shelves, accessories or services.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable racking and shelving suppliers, installers and inspectors. See our privacy policy.

Get free racking quotes