Get free quotes

Services & fit-out

A dented upright is a bay you should empty today

Free quotes from racking repair teams across South Africa. One request, no obligation.

A pallet racking frame with a new bolted repair section at the foot of one upright in a warehouse
Load notice
OffloadUnload a damaged bay first
Offload, repair, reloadRef RQ/RAC/149

At a glance: Racking RepairsRQ/RAC/149

B-01Suits
Sites with forklift damage to their racking
B-02How it works
Offload, repair kit or new part, like for like
B-03Range
From one dented upright to a whole run
B-04Check first
Matching parts and the maker's load rating
B-05Lead time
Urgent call-outs often within days

Most racking damage happens at the foot of an upright or the end of an aisle, when a forklift turns a little too tight. Racking repairs put the bay back to its rated strength: a damaged upright is replaced or fitted with an approved repair kit, and bent beams, braces and missing locks are replaced. This page explains what to do the moment damage happens, how repairs are done properly and what to avoid. Send one request and independent installers who repair racking in your area quote you directly.

First, offload the bay

When an upright is dented, bent or twisted, or a beam is damaged, stop using the bay. Offload it carefully, starting from the top, and keep people and trucks away until it has been assessed. If the damage is serious, offload the bays either side as well. Report it to the person responsible for racking safety on site, and take photos for the repair contractor. Do not let anyone try to push a frame back into line with a forklift. If you had a racking inspection, red items need this at once and amber items need it before the bay is reloaded.

Upright repair kits and replacements

A damaged upright is either replaced, which means unloading and partly stripping the frame, or repaired with an upright repair kit: the damaged section is cut out and a new section is bolted in its place with a new base plate. Use a kit from the racking maker or one of an approved design for that system. Beams, braces, base plates and safety locks are simply replaced. The rule is like for like: the same profile, the same thickness and the same load rating, so the load notice still holds. A good contractor checks the frame on either side of the repair as well, because a heavy impact can bend bracing or loosen anchors further along the run.

What never to do

  • never straighten bent steel by heating or hammering it
  • never weld onto racking components
  • never swap in a beam or brace from another system because it looks similar
  • never leave a bay loaded while you wait for parts
  • never take out a beam level or move beams without checking the load notice

If you are not sure what the racking is, a repair contractor can identify the system and source matching parts.

After the repair

Ask the contractor to confirm in writing which parts were replaced and that the bay can be reloaded to the posted loads. Then look at why it happened. If the same uprights keep getting hit, fit column guards and end barriers, widen a tight turn, or look again at the layout.

What to put in your request

  • Photos of each damaged upright, beam or brace
  • The racking system or maker, if you know it
  • The frame height and depth, and the beam lengths
  • Whether the bays are already offloaded
  • The inspection report, if you have one

Racking Repairs for warehouses, shops, workshops and homes

  • Warehouses and distribution centres: upright repair kits fitted at aisle ends after reach truck knocks
  • Factories and manufacturers: damaged frames near the production floor repaired with matching parts
  • Shops, supermarkets and spaza shops: a bent beam in the storeroom replaced before the bay is loaded again
  • Wholesalers and building supply yards: uprights and braces replaced in tall racking after a forklift impact
  • Workshops, contractors and trades: a bent upright on a parts rack replaced and the anchors redone
  • Offices, archives, schools and hospitals: sagging decks and bent beams in archive racking replaced like for like
  • Restaurants, caterers and wine cellars: damaged racking in a cold store or dry goods store repaired after a pallet jack knock
  • Homeowners: a bent shelf or upright on garage shelving swapped for a matching part
  • Farms, packhouses and co-ops: packshed racking repaired before the season so forklifts can work it safely

Frequently asked questions

Do you repair racking yourselves?
No. We are a free quote request service and we do not repair, supply or inspect racking. We pass your request to independent racking installers and repair contractors who work in your area, and they quote you directly.
Can I get an emergency call-out after a forklift hit?
Many contractors offer urgent call-outs for serious damage. Offload and isolate the bay first, then say in your request that it is urgent and send photos of the damage, the racking system if you know it and the frame height.
Is a repair kit as good as a new upright?
A kit from the maker, or of an approved design for that system, fitted as instructed, is meant to restore the frame's rating. A home-made splice is not. Ask the contractor where the kit comes from and what rating applies after the repair.
Should repairs wait for the annual inspection?
No. Damage should be reported and assessed when it happens, not saved up for the yearly visit. The inspection is a safety net, not the only time anyone looks. Keep a simple damage log so you can show what was found, when the bay was offloaded and when it was repaired.

Racking Repairs by province and city

More racking, shelving and services

Free quote request, no obligation

Request quotes for racking repairs

Fill it in the way a storeman books stock in: how many pallets and how heavy, how high the building is and what loads it, or how many bays of shelving and how big, or simply how many inspections, repairs or vans. Suppliers, installers and inspectors in your area quote you directly.

Pick ticket: quote requestRacking Repairs
Ticket
25032
Bin
B-20-3
Date
2026-11-16
Cost
Free

1The job

2How many (optional, it helps the quote)

Your requestnot to scale

-
-
-
-
-
-
Estimate
-

Plain arithmetic for the request, not a racking design.

3Where you are now

4Your list (optional)

  1. 01
  2. 02
Up to 12 lines: bays, frames, beams, shelves, accessories or services.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable racking and shelving suppliers, installers and inspectors. See our privacy policy.

Get free racking quotes