Get free quotes

Services & fit-out

Let the guard take the knock instead of the upright

Free quotes from racking protection suppliers and installers across South Africa. One request, no obligation.

Yellow column guards and a steel end of aisle barrier at the end of a pallet racking run
Load notice
ImpactForklift knocks absorbed
Guards where trucks turnRef RQ/RAC/548

At a glance: Racking Protection and BarriersRQ/RAC/548

C-01Suits
Warehouses with forklift and pallet jack traffic
C-02How it works
Guards, barriers and mesh at the risk points
C-03Range
From a few guards to a whole site
C-04Check first
Aisle ends, truck type and where damage occurs
C-05Lead time
Stock guards often in days, barriers in weeks

Most racking damage comes from forklifts at the foot of uprights and at the ends of aisles. Racking protection puts something tougher, cheaper and easier to replace in the way: column guards, end barriers, mesh to stop stock falling, and clear floor marking. This page explains the main kinds, where they go and what to ask for. Protection does not make overloading or careless driving safe, but it cuts the number of repairs. Send one request and independent suppliers and installers in your area quote you directly.

Column guards and upright protectors

Column guards (upright protectors) fit around the foot of an upright, usually on the aisle side. Some clip or wrap on, others are bolted to the floor and stand free of the upright so a knock does not pass into the frame. Floor fixed guards generally take a harder hit, while lighter clip-on types suit pallet jacks and slow traffic. Put them at every aisle end first, then along aisles where trucks turn or reverse. Ask the supplier which type suits your trucks, the upright size and how much of the aisle each guard takes up, because a guard that sticks out too far can itself become something to hit.

End barriers, deflectors and walkway barriers

  • End frame barriers: low steel or polymer rails bolted to the floor across the exposed end of a run
  • Rack end protection: full-width guards for the corner uprights
  • Beam deflectors: angled plates that guide a pallet onto the beam
  • Pedestrian walkway barriers: rails that keep people and trucks apart along walkways and doors

Plan where barriers go on the layout drawing so they do not narrow an aisle below what your trucks need.

Mesh and anti-collapse protection

Mesh back guards fixed to the back of a run stop cartons and loose items from falling into the next aisle or a walkway. Anti-collapse mesh panels do a similar job on higher levels and at the sides. Wire mesh decks on the beams stop pallets and boxes from dropping through. They are worth it where people walk beside or behind the racking, above packing benches and offices, and where stock is loaded from one side and picked from the other. Mesh is fixed to the racking or to its own frame, so ask the supplier how it attaches to your system.

Floor marking and good habits

Yellow lines for aisles, walkways, pallet positions and crossing points help drivers and pedestrians know where they should be. Good lighting at aisle ends, a speed limit and training matter too. Keep track of which guards get hit: a guard that is always bent shows where the layout or the driving needs attention. Your racking inspection report should list damaged or missing protection.

What to put in your request

  • The number of aisle ends and runs to protect
  • The racking system and upright size, if known
  • The trucks you use: forklift, reach truck, pallet jack
  • Photos of where damage keeps happening
  • Whether you need walkway barriers or floor marking

Racking Protection and Barriers for warehouses, shops, workshops and homes

  • Warehouses and distribution centres: column guards at every aisle end and barriers along walkways and dock doors
  • Factories and manufacturers: barriers keeping forklifts clear of racking and walkways near production lines
  • Shops, supermarkets and spaza shops: clip-on guards in a storeroom where pallet jacks turn between bays
  • Wholesalers and building supply yards: end frame barriers and mesh back guards in a busy cash and carry warehouse
  • Workshops, contractors and trades: guards on parts racking beside the workshop floor where vehicles move
  • Offices, archives, schools and hospitals: mesh back guards on archive racking beside a walkway
  • Restaurants, caterers and wine cellars: guards in a cold store or dry goods store where pallet jacks work
  • Homeowners: a simple wheel stop so the car cannot nudge garage shelving
  • Farms, packhouses and co-ops: barriers at the racking ends in a packshed with busy forklift traffic

Frequently asked questions

Do you supply or fit racking protection?
No. We are a free quote request service. We do not sell, install or inspect anything. We pass your request to independent racking suppliers and installers who work in your area, and they quote you directly.
Can protection be added to existing racking?
Yes. Most column guards, end barriers and mesh can be fitted to racking that is already loaded and working. Floor fixed barriers need drilling into the slab, so the installer may need a clear area while they work.
Where should I put protection first?
Start with the uprights at the end of every aisle and the ends of runs facing busy routes, then add it where your inspection report or your own checks show repeated damage.
Does a guard mean I can ignore damage behind it?
No. Look behind the guard after any hit. A guard can be pushed into the upright, and both should be checked. Bent guards are replaced so they can do their job next time. Record the hit in your damage log, and if the same guard is bent every month, look at the route, the lighting or the driving at that corner.

Racking Protection and Barriers by province and city

More racking, shelving and services

Free quote request, no obligation

Request quotes for racking protection

Fill it in the way a storeman books stock in: how many pallets and how heavy, how high the building is and what loads it, or how many bays of shelving and how big, or simply how many inspections, repairs or vans. Suppliers, installers and inspectors in your area quote you directly.

Pick ticket: quote requestRacking Protection and Barriers
Ticket
84134
Bin
G-11-5
Date
2026-11-16
Cost
Free

1The job

2How many (optional, it helps the quote)

Your requestnot to scale

-
-
-
-
-
-
Estimate
-

Plain arithmetic for the request, not a racking design.

3Where you are now

4Your list (optional)

  1. 01
  2. 02
Up to 12 lines: bays, frames, beams, shelves, accessories or services.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable racking and shelving suppliers, installers and inspectors. See our privacy policy.

Get free racking quotes