Get free quotes

Free calculator

Rack load calculator

From the pallet weight and the number of levels, see what each beam pair, each bay and each frame has to carry, and the point load on the floor under every baseplate.

Rack load calculatorTL-02

The loads

Load per beam pair
0
Load per beam
0
Spread along each beam
0
Load per bay
0
Load on an inner frame
0
Load on an end frame
0
Load on one inner upright
0
Point load under that baseplate
0
Pressure under the baseplate
0
Whole run
0

Every beam pair, frame and baseplate in a pallet rack carries a share of the stock. This calculator adds up those shares from your heaviest pallet, so you can compare them with the maker's load notice, ask for the right beams and frames, and give the engineer the point load on the floor.

How the load travels

  • Beam pair: the pallets on one level, split between the front and back beam. Spread along the beam, it is given in kg per metre.
  • Bay: all the beam levels in a bay, plus the steel if you enter it.
  • Frames: an inner frame carries half of each bay on either side, so about one full bay. An end frame carries half a bay.
  • Uprights and baseplates: each frame stands on two uprights, so one inner upright carries about half the frame load. The point load under its baseplate is shown in kN, and as a pressure on the baseplate area.

These are even shares of the stock weight, without the dynamic effect of placing pallets, uneven loading or the frame's own buckling limits. The maker's rated loads already allow for those, so compare like with like: your loads must stay at or below the ratings on the load notice for your beam spacing.

When to ask for an engineer

Ask for the floor slab to be checked when the racking is tall, heavily loaded or going onto an old or unknown slab, when the point loads are high, or when the building has a suspended floor. Give the engineer the point load per baseplate, the baseplate size and the frame spacing from this calculator. The Occupational Health and Safety Act puts the duty for safe equipment on the employer, and a load notice on every run is the simplest way to show what the racking may carry.

Frequently asked questions

What is the difference between beam load and bay load?
The beam load is what one pair of beams carries on one level. The bay load is everything the two frames of a bay carry from all its beam levels. A bay can be limited by either, so a load notice gives both.
Why does the frame rating fall when the beams move?
An upright's strength depends on the distance between beam levels. Raising the bottom beam or removing a level lets the upright buckle more easily, so the frame carries less. Ask the maker before changing beam heights, and update the load notice.
What is a UDL?
A uniformly distributed load: weight spread evenly along a beam or shelf. Beam and shelf ratings usually assume it. Point loads, such as a heavy item in the middle of a shelf, need a stronger beam than the same weight spread out.

More calculators and tools

Free quote request, no obligation

Request quotes: pallet racking

Fill it in the way a storeman books stock in: how many pallets and how heavy, how high the building is and what loads it, or how many bays of shelving and how big, or simply how many inspections, repairs or vans. Suppliers, installers and inspectors in your area quote you directly.

Pick ticket: quote requestPallet Racking
Ticket
50413
Bin
H-19-3
Date
2026-11-20
Cost
Free

1The job

2The pallets and the building (optional, it helps the quote)

The rack in elevationnot to scale

-
-
-
-
-
-
Estimate
-

Plain arithmetic for the request, not a racking design.

3Where you are now

4Your list (optional)

  1. 01
  2. 02
Up to 12 lines: bays, frames, beams, shelves, accessories or services.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable racking and shelving suppliers, installers and inspectors. See our privacy policy.

Get free racking quotes