Second hand racking is common in South Africa, as businesses move, close or change how they store goods. Used pallet racking and shelving can save money and time, but only if each frame, beam and lock is in good condition and you know what the system is rated for. This page explains what to check, why mixing systems causes trouble, what to budget for besides the steel, and how to sell racking you no longer need. Send one request and independent dealers and installers in your area quote you directly.
What to check on every part
- Uprights: dents, bends, twists and rust, especially near the base plate
- Bracing: bent or missing diagonals and horizontals
- Beams: damage, sagging, cracked welds at the end connectors, worn connector hooks
- Locks and base plates: missing, bent or rusted
- Decks and accessories: mesh decks, pallet supports, row spacers
Reject anything that has been straightened or welded. A racking inspection of what you are buying is money well spent. If you can, look at the racking while it is still standing in the old building: you can see how it was loaded, whether the frames were plumb and where the forklifts hit it.
Mixed systems and load ratings
Beams from one maker do not always fit another maker's uprights, even when they look similar, and a beam that hooks in loosely can drop out. Ask the seller for the maker or system name, the original frame and beam sizes, and the load ratings. Without known ratings, nobody can honestly write a load notice. Some dealers can identify a system from its connector pattern and supply matching new parts. If you are adding to racking you already have, send photos of both connectors side by side and measure the upright profile and the hole spacing. Be careful with frames that are taller or shallower than you need: cutting them down or mixing depths is a job for the maker's rules, not guesswork.
Budget beyond the steel
Used racking is not finished when you pay for the frames. Allow for:
- delivery and offloading
- new anchors, which should not be reused
- new safety locks where any are missing or worn
- replacement parts for damaged pieces
- installation, plumbing and levelling, see racking installation
- new load notices based on the system's ratings
Add it up before you compare a used price with new racking. On a small job the saving can be smaller than it looks.
Selling or trading in old racking
If you are moving or downsizing, some dealers buy used racking and shelving, often offering to dismantle and remove it. Clean, undamaged, complete systems from a known maker are easiest to sell. Have the system name, the frame heights and depths, the beam lengths and the number of bays ready. If you plan to take it with you instead, see racking relocation.
What to put in your request
- Buying or selling, and how many bays
- The frame height and depth, and beam length
- Your heaviest pallet and the levels you need
- Photos of existing racking or the stock on offer
- Whether you need delivery, installation or removal
Used Racking and Shelving for warehouses, shops, workshops and homes
- Warehouses and distribution centres: extra used bays matched to the existing system for a busy season
- Factories and manufacturers: second hand pallet racking for raw material in a new production shed
- Shops, supermarkets and spaza shops: used gondola and steel shelving for a new shop or storeroom
- Wholesalers and building supply yards: a whole used racking system bought from a warehouse that closed
- Workshops, contractors and trades: a few second hand bays for parts and tyres, checked and anchored
- Offices, archives, schools and hospitals: used steel shelving or longspan for files and archive boxes
- Restaurants, caterers and wine cellars: used shelving for a dry goods store, checked for rust and damage
- Homeowners: second hand steel shelving for the garage, fixed to the wall
- Farms, packhouses and co-ops: used racking for a packshed or feed store at a lower cost
Frequently asked questions
Do you sell used racking yourselves?
Is used racking safe?
Can I add used racking to my existing runs?
Is used shelving worth buying?
Used Racking and Shelving by province and city
- Johannesburg
- Pretoria
- Centurion
- Midrand
- Sandton
- Randburg
- Roodepoort
- Krugersdorp
- Randfontein
- Germiston
- Boksburg
- Benoni
- Kempton Park
- Alberton
- Vanderbijlpark
- Vereeniging
- Durban
- Pinetown
- Pietermaritzburg
- Richards Bay
- Newcastle
- Ladysmith
- Gqeberha (Port Elizabeth)
- East London
- Kariega (Uitenhage)
- Mthatha
- Cape Town
- Bellville
- Paarl
- Stellenbosch
- George
- Worcester
- eMalahleni (Witbank)
- Middelburg
- Secunda
- Mbombela (Nelspruit)
- Rustenburg
- Brits
- Klerksdorp
- Potchefstroom
- Mahikeng
- Polokwane
- Tzaneen
- Kimberley
- Upington
- Bloemfontein
- Welkom
- Sasolburg
