When a business moves to a bigger or better building, its racking usually goes too. Racking relocation means emptying the racking, recording what is there, taking it down, moving it, checking every part and putting it back up to a new layout on a new slab. This page explains the steps, what usually needs replacing and how to plan around downtime. Send one request and independent installers who move racking in your area quote you directly.
Before anything comes down
Start with a plan for the new building. Its clear height, column grid, doors and slab may be different, so a straight copy of the old layout may not fit or may waste space. Many moves are combined with a redesign; see warehouse layout and storage design. Record the existing system: maker, frame heights and depths, beam lengths, levels and the load notices. Ask whether the new slab has been checked for the racking's point loads. Photograph the old installation and keep a copy of the old drawing and load notices: they help the installer match parts and set the right ratings at the new site.
Strip, label and move
A typical relocation runs like this:
- offload all stock and clear the bays
- dismantle from the top down, removing beams, locks and decks
- sort and label parts by size, and bundle beams by length
- load and strap down for transport
- check every part at the new site and set aside anything damaged
- reinstall to the new layout: plumb, level, new anchors, every lock fitted
- fit fresh load notices that match the new beam levels
What needs replacing
Anchors are not reused: they are drilled out or cut off and new ones fitted. Missing or worn safety locks are replaced. Dismantling often shows damage that was hidden by stock, so expect some uprights, braces or beams to need replacing with matching parts; see racking repairs. If you are adding bays, they must match the system. Budget for this from the start: the quote for the move usually covers labour, transport and anchors, while damaged parts are often priced once they have been found. Ask how each installer handles that.
Planning around downtime
The move can be phased so one part of the old warehouse keeps working while the first runs go up in the new one. Agree the order with the installer and your transport and stock teams, and decide where stock will sit while the racking is down: some businesses rent short-term space or keep pallets on the trucks for a day or two. Leave time for the new building's fire installer to check sprinkler clearances, and plan a racking inspection soon after the reinstall. If the old building has to be handed back clean, ask the installer to quote for filling anchor holes and removing barriers and floor fixings too.
What to put in your request
- The number of bays, the system and the frame height
- Both addresses and the distance between them
- A floor plan of the new building, if you have one
- Whether you want the same layout or a new one
- Your moving dates and how much downtime you can take
Racking Relocation for warehouses, shops, workshops and homes
- Warehouses and distribution centres: a whole distribution centre's racking moved in phases to a bigger building
- Factories and manufacturers: racking moved with the factory, then laid out around the new production line
- Shops, supermarkets and spaza shops: storeroom racking and shelving moved to a new shop or depot
- Wholesalers and building supply yards: pallet racking moved to a bigger building closer to the main routes
- Workshops, contractors and trades: parts racking and heavy-duty shelving taken down and rebuilt at new premises
- Offices, archives, schools and hospitals: archive shelving and longspan moved with the files, kept in order
- Restaurants, caterers and wine cellars: dry store and cold room shelving moved to a new central kitchen
- Homeowners: garage shelving taken down and rebuilt in a new house
- Farms, packhouses and co-ops: racking moved from an old shed to a new packshed or cold store
Frequently asked questions
Do you move racking yourselves?
Can racking go up in the same layout in the new building?
How long does a relocation take?
Can I sell the racking I no longer need?
Racking Relocation by province and city
- Johannesburg
- Pretoria
- Centurion
- Midrand
- Sandton
- Randburg
- Roodepoort
- Krugersdorp
- Randfontein
- Germiston
- Boksburg
- Benoni
- Kempton Park
- Alberton
- Vanderbijlpark
- Vereeniging
- Durban
- Pinetown
- Pietermaritzburg
- Richards Bay
- Newcastle
- Ladysmith
- Gqeberha (Port Elizabeth)
- East London
- Kariega (Uitenhage)
- Mthatha
- Cape Town
- Bellville
- Paarl
- Stellenbosch
- George
- Worcester
- eMalahleni (Witbank)
- Middelburg
- Secunda
- Mbombela (Nelspruit)
- Rustenburg
- Brits
- Klerksdorp
- Potchefstroom
- Mahikeng
- Polokwane
- Tzaneen
- Kimberley
- Upington
- Bloemfontein
- Welkom
- Sasolburg
