Longspan shelving, often called longspan racking, is built like small pallet racking but loaded by hand. Frames and long step beams carry boarded or wire mesh decks, giving wide, open bays with no centre upright to work around. It suits cartons, archive boxes, tyres, bulky light goods and picking stock. It carries more per level than ordinary steel shelving and costs less than pallet racking for loads that never see a forklift. This page explains how it is built, where it works and what to ask for.
How it is built
Upright frames are joined by pairs of step beams at levels you can change. The step in the beam holds the deck flush: chipboard or plywood boards for cartons and small items, wire mesh where air flow and light matter or where sprinklers need to reach through. Bays are long and open, so bulky items fit without fighting uprights. The maker rates each level and each bay, and the figures go on the load notice. Like pallet racking, the beams lock into the uprights with clips, and tall bays should be anchored to the floor or tied back. Spread the load evenly along each deck rather than piling heavy items in the middle of the span.
Where it works
- Carton stock and picking faces in a warehouse, often at low level under pallet racking.
- Archive boxes and files in a records store.
- Tyres, exhausts and bulky parts in motor workshops.
- Bedding, appliances and boxed goods in a shop's storeroom.
- Raw material and packaging next to a production line.
Because the levels move in steps, the same bays can be reset when your stock changes, which suits seasonal goods and growing businesses.
Multi-tier with walkways
Where the building is tall, longspan bays can be built two or three tiers high with steel walkways, stairs and handrails between them, so people pick at each level. This is a lighter alternative to a full mezzanine floor. A multi-tier system carries people as well as stock, so it needs a proper design, edge protection, safe stairs and fire planning; ask the supplier whether building plans and an engineer are needed for your site.
Longspan, shelving or pallet racking
Steel shelving is cheaper for small items on narrow shelves, and heavy-duty shelving suits dense, heavy parts. Longspan is the better choice when items are big, the bays need to be wide, or each level carries more than a light shelf can. Once loads arrive on pallets and move by forklift, pallet racking takes over. Many stores use all three side by side, and a supplier can show you on a sketch where each one fits best.
What to put in your request
- Size and weight of the largest items
- Number of bays or wall length to fill
- Height you want or the building height
- Chipboard, plywood or wire mesh decks
- Whether you need a multi-tier walkway
Longspan Racking for warehouses, shops, workshops and homes
- Warehouses and distribution centres: carton picking faces and bulky light goods at low level beside pallet racking
- Factories and manufacturers: packaging, components and small raw material beside the production line
- Shops, supermarkets and spaza shops: a storeroom of boxed goods, bedding or appliances behind the shop floor
- Wholesalers and building supply yards: broken cases and loose stock picked by hand in a cash and carry
- Workshops, contractors and trades: tyres, exhausts, panels and bulky spares in a motor workshop
- Offices, archives, schools and hospitals: archive boxes and files in a records store or basement
- Restaurants, caterers and wine cellars: dry goods, linen and boxed supplies in a hotel or caterer's store
- Homeowners: a heavy shelving run for boxes and tools in a large garage or storeroom
- Farms, packhouses and co-ops: boxed spares, seed and supplies in a farm store or packshed
Frequently asked questions
Do you sell longspan racking?
No. We are a free quote request service. We pass your request to independent racking and shelving suppliers and installers in your area, who quote you directly. We do not make, sell or install anything ourselves.
Is longspan racking the same as longspan shelving?
Yes, the two names are used for the same thing: hand loaded bays with frames, long beams and decks. Some suppliers call the heavier versions racking and the lighter ones shelving. What matters is the rating per level from the maker, so compare that rather than the name when you look at quotes.
Should I choose chipboard or wire mesh decks?
Chipboard gives a flat surface for small items and cartons. Wire mesh lets light and air through, does not soak up spills and may suit sprinkler requirements better. Ask the supplier and your fire installer.
What should I send for a quote?
Send the size and weight of your largest items, the number of bays or the length of wall to fill, the height you can reach or the building height, and the deck you prefer. Photos of the space help, along with any doors, windows, plug points or columns the bays must fit around.
Longspan Racking by province and city
- Johannesburg
- Pretoria
- Centurion
- Midrand
- Sandton
- Randburg
- Roodepoort
- Krugersdorp
- Randfontein
- Germiston
- Boksburg
- Benoni
- Kempton Park
- Alberton
- Vanderbijlpark
- Vereeniging
- Durban
- Pinetown
- Pietermaritzburg
- Richards Bay
- Newcastle
- Ladysmith
- Gqeberha (Port Elizabeth)
- East London
- Kariega (Uitenhage)
- Mthatha
- Cape Town
- Bellville
- Paarl
- Stellenbosch
- George
- Worcester
- eMalahleni (Witbank)
- Middelburg
- Secunda
- Mbombela (Nelspruit)
- Rustenburg
- Brits
- Klerksdorp
- Potchefstroom
- Mahikeng
- Polokwane
- Tzaneen
- Kimberley
- Upington
- Bloemfontein
- Welkom
- Sasolburg
