A plumber who spends twenty minutes a day looking for a fitting is losing time, and a loose toolbox is dangerous when you brake hard. Van racking is shelving, drawers, bins and racks built to fit the inside of a panel van or a bakkie canopy, bolted to the floor and walls, often with a ladder rack on the roof. This page explains the options, what to think about with weight and securing the load, and what to send for a quote. Send one request and independent fitters in your area quote you directly.
What goes in a fitted van
- Shelving units with lipped shelves so stock does not slide off
- Drawers for tools and small fittings, with latches that stay shut
- Parts bins and trays for fittings, fuses, screws and connectors
- Racks for pipe, conduit, cable reels and gas bottles
- Roof ladder racks and pipe tubes
- Floor lining and tie-down points
Fitters plan the layout around the side door, the back doors and the jobs you do most. The things you use every day go near the side door at a comfortable height; bulky items and spares that come out once a week go deeper in. Leave a clear space on the floor for the big jobs.
Steel or aluminium, and the payload
Van racking is usually made from lightweight steel or aluminium. Aluminium is lighter, which leaves more of the vehicle's payload for stock and tools; steel often costs less. Whatever you choose, the fit-out, your tools and stock all count against the vehicle's payload, so check the figure in the vehicle documents and ask the fitter for the weight of the fit-out. A van loaded beyond its payload brakes and handles badly, wears its tyres and suspension faster and can affect your insurance. Plain shelves weigh less than a full drawer system, so only fit drawers where you need them.
Securing it properly
Units should be bolted to the floor and the body at points the fitter knows are strong enough, not just screwed into thin panels. Heavy items go low and towards the front, against the bulkhead. Drawers and doors need latches, and loose loads need straps or nets. A good fit-out is also easy to remove and refit if you change vehicles. Ask the fitter how they treat bolt holes and whether they line the floor and sides first, which helps when the vehicle is sold or the lease ends. Keep sharp edges covered, keep wiring and lights clear of drill holes, and check the fixings now and then, as vibration loosens bolts over time.
Who uses van racking
Plumbers, electricians, air conditioning and refrigeration technicians, security and fibre installers, mobile mechanics and couriers all use fitted vans, from a small panel van or a half-ton bakkie with a canopy to a long wheelbase van. A fleet may want the same layout in every vehicle. For storage at your base, see industrial shelving or garage shelving.
What to put in your request
- The vehicle type and size, and the year
- Your trade and the tools and stock you carry
- Shelving, drawers, bins or racks you want
- Whether you need a roof ladder rack
- How many vehicles, and whether layouts should match
Van Racking and Vehicle Shelving for warehouses, shops, workshops and homes
- Warehouses and distribution centres: shelving in delivery vans so parcels stay sorted by route
- Factories and manufacturers: service vans fitted out for technicians who maintain the factory's equipment
- Shops, supermarkets and spaza shops: a delivery van fitted with shelving for orders and returns
- Wholesalers and building supply yards: vans fitted for sales reps carrying samples and small orders
- Workshops, contractors and trades: plumbers, electricians and mobile mechanics with drawers, bins and a ladder rack
- Offices, archives, schools and hospitals: a van fitted out for IT, security or fibre installers
- Restaurants, caterers and wine cellars: a caterer's van with shelving that keeps crates and equipment secure
- Homeowners: a bakkie canopy with drawers for tools or camping gear
- Farms, packhouses and co-ops: a farm bakkie fitted with drawers for tools, spares and veterinary supplies
Frequently asked questions
Do you fit van racking yourselves?
Can van racking be moved to a new vehicle?
Can a bakkie with a canopy be fitted out?
How long does a fit-out take?
Van Racking and Vehicle Shelving by province and city
- Johannesburg
- Pretoria
- Centurion
- Midrand
- Sandton
- Randburg
- Roodepoort
- Krugersdorp
- Randfontein
- Germiston
- Boksburg
- Benoni
- Kempton Park
- Alberton
- Vanderbijlpark
- Vereeniging
- Durban
- Pinetown
- Pietermaritzburg
- Richards Bay
- Newcastle
- Ladysmith
- Gqeberha (Port Elizabeth)
- East London
- Kariega (Uitenhage)
- Mthatha
- Cape Town
- Bellville
- Paarl
- Stellenbosch
- George
- Worcester
- eMalahleni (Witbank)
- Middelburg
- Secunda
- Mbombela (Nelspruit)
- Rustenburg
- Brits
- Klerksdorp
- Potchefstroom
- Mahikeng
- Polokwane
- Tzaneen
- Kimberley
- Upington
- Bloemfontein
- Welkom
- Sasolburg
