Get free quotes

Free calculator

Pallet, aisle and load guide

The sizes that decide a racking layout: pallets, aisle widths for each kind of truck, the gaps around each load, and a converter for the load units on drawings and load notices.

Pallet, aisle and load guideTL-09

How it converts

1,000 kg
9.81 kN
1 kN/m²
about 102 kg/m²
1 inch
25.4 mm
1 m²
10.764 ft²

Type in any box and its partner updates. Load notices and drawings in South Africa use kg per beam level and per bay; engineers often write floor loads in kN/m².

Most racking decisions come down to a few sizes: the pallet, the aisle the truck needs and the gaps around each load. Here they are in one place, with a converter for the load units that appear on drawings, load notices and floor specifications.

Common pallet sizes

Size, mmKnown asNotes
1200 x 1000The common South African palletUsed by the big pallet pools and most local supply chains
1200 x 800Euro palletCommon on imported goods from Europe
1219 x 101648 x 40 inchThe North American size
1100 x 1100Square palletCommon in Asia and for some drums and bags

The side facing the aisle decides the beam length, the other side the frame depth. Note both in the request, with the load height and the heaviest pallet.

Typical aisle widths

TruckTypical aisle
Counterbalance forkliftAbout 3.2 to 3.7 m
Reach truckAbout 2.6 to 3.2 m, some models less
Very narrow aisle (turret or articulated) truckAbout 1.5 to 2.1 m
Hand pallet truck or walkie stackerSet by the truck and pallet; ask the maker

From published forklift guides. The exact aisle depends on the truck model, the pallet size and how it is handled, so use the truck maker's figure for the layout.

Gaps around each load

Racking makers commonly allow about 75 to 100 mm between pallets and between a pallet and the upright, and about 100 mm or more above each load for lifting off, with larger gaps on taller racking. Pallets usually overhang the front and back beams by about 50 mm. The European racking standard EN 15620 sets these clearances by height and type of racking, and many South African suppliers design to it.

Frequently asked questions

How do I convert kg to kN?
Multiply by 9.81 and divide by 1,000: 1,000 kg is about 9.81 kN. For floor loads, 1 kN/m² is about 102 kg/m².
Why do pallets overhang the beams?
So that the pallet's bottom boards rest fully on both beams, and so the forks have room. About 50 mm overhang front and back is common. Pallets that sit too far forward or back can slip off.
What is a flue space?
The gap between back to back pallets, and between pallets side by side. It lets sprinkler water and heat move up through the racking, so keep it clear.

More calculators and tools

Free quote request, no obligation

Request quotes: a warehouse layout

Fill it in the way a storeman books stock in: how many pallets and how heavy, how high the building is and what loads it, or how many bays of shelving and how big, or simply how many inspections, repairs or vans. Suppliers, installers and inspectors in your area quote you directly.

Pick ticket: quote requestWarehouse Layout and Storage Design
Ticket
95295
Bin
C-08-5
Date
2026-11-20
Cost
Free

1The job

2The floor area (optional, it helps the quote)

The floor in plannot to scale

-
-
-
-
-
-
Estimate
-

Plain arithmetic for the request, not a racking design.

3Where you are now

4Your list (optional)

  1. 01
  2. 02
Up to 12 lines: bays, frames, beams, shelves, accessories or services.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable racking and shelving suppliers, installers and inspectors. See our privacy policy.

Get free racking quotes